Reliability Starts At The Top

1-800-238-5375 REQUEST A QUOTE



There are a variety of roofing systems on the market that are available to you, the client. Standard Roofing Company Inc. only uses roofing systems and products that have been tested and approved by the Alberta Roofing Contractors Association (ARCA) to perform in Alberta’s climate. This along with the technical expertise and experience of our estimating and construction team, enable us to provide our clients with roofing solutions most suitable to your specific building design and budget. This will ensure the system installed with have the functionality and performance you require.


SBS (modified bitumen roof membrane)

Composite roofing membranes comprised of a reinforcing sheet coated with polymer modified asphalt and may be surfaced with a poly film, sand or mineral granules. SBS membranes can be torch applied, self-adhered, mechanically fastened, adhered with 2-part adhesive, or mopped in place with bitumen.

Certified product applicator of: Soprema –, IKO –, and Siplast –


EPDM (ethylene propylene diene monomer roof membrane)

A single ply reinforced or non-reinforced membrane manufactured from synthetic rubber. Ethylene Propylene Diene Monomer (EPDM) can be manufactured into large sheets for application on a roof. The membrane can be loose laid, ballasted with gravel ballast or pavers to hold the membrane in place. It can also be fully or partially adhered as well. The membrane can be adhered with contact adhesives, or mechanically fastened. This product is available in black and white.

Certified product applicator of: Firestone – and Carlisle –


Standing seam architectural roof panel and wall cladding including custom metal roof related flashings.


PVC (poly vinyl chloride roof membrane)

A single ply reinforced or non-reinforced membrane composed of a single ply sheet coated with P.V.C. produced by the polymerization of vinyl chloride. Membrane laps are bonded by hot air welding. Membranes may be loose laid, mechanically attached, or adhered with adhesive.

Certified product applicator of: Sarnafil –


TPO (Flexible Thermoplastic Polydefin)

Thermoplastic polyolefin (TPO) roofing membrane is produced with polyester reinforcement. Membrane laps are bonded by hot air welding. This product comes in rolls and can be loose laid, adhered, or mechanically fastened.

Certified product applicator of: Firestone –


BUR (Built Up Roof Membrane)

Built up bituminous primary membranes may be comprised of three or four piles of organic or inorganic felt adhered with inter-ply applications of hot bitumen. The bitumen used to adhere built-up roofing membranes may be roofing asphalt or polymer modified asphalt. Asphalt is the most common bitumen used in Alberta.

Certified product applicator of: BP – and IKO –


Standard Roofing Company Inc.
9935 – 29A Avenue
Edmonton, AB
T6N 1A9


Toll Free: 1-800-238-5375
Phone: 780-462-9552
Fax: 780-462-8868

Terms of Use
Privacy Policy

Estimating – New & Reroof Roof Construction
Darin Dodd – Ext 225
[email protected]

Leak Response, Repair & Maintenance
J.R. (Albert) Tandy – Ext 224
[email protected]

Project Management – New & Re-Roof Construction
Barrett Jarosch – Ext 226
[email protected]

Employment Opportunities
Barrett Jarosch – Ext 226
[email protected]

General Inquiries
Alison Topping – Ext 230
[email protected]

Standard Roofing

© Copyright 2018 Standard Roofing – All Rights Reserved